80

Download Previous Year Diploma Paper of Fluid Mechanics 3rd Sem/Civil/Dec 2016 Paper

Fluid Mechanics 3rd Sem/Civil/Dec 2016 Diploma Question Paper

                                      SECTION-A

     a) Fill in the blanks                                               1×10=10

     1) When the fluid is at rest shear stress is _____________
     2) Density of water is __________ at 4ºC.
     3) According to  _________ the pressure at a point in a fluid at rest is same in all directions.
     4) Intensity of pressure at the bottom of a tank filled with fluid having specific weight ‘w’ upto a height of ‘h’ will be ___________.
     5) Atmosphere pressure at sea level is ____ mm of mercury.
     6) Piezometer measures ____________ pressure only.
     7) Laminar flow is also called ________ flow.
     8) The pipe running partially full behaves like __________ .
     9) Pumps convert    mechanical energy into _______________ .
    10) Water in canals runs under pressure.

   (b) True/ False statements 1×5=5

    11) Gases possess definite volume.
    12) Unit of Kinematic viscosity is Stoke.
    13) U-Tube can be used to measure vaccum pressure.
    14) Hydraulic jump occurs on upstream side of dam.
    15) Centre of pressure acts as centre of gravity for immersed surface.

                                      SECTION-B

Q2. Attempt any five questions.                                                                    5×6=30

1) Define “Fluid” and briefly describe its types along with examples.
2) Explain the fluid property ‘Capillarity’.
3) Differentiate between gauge pressure and vaccum pressure.
4) Define Bernaulli’s theorem and write down its assumptions.
5) Write down the difference between Orifice and Notch.
6) What do you understand by most economical channel section? Write down conditions for rectangular channel section to be most economical.
7) Define priming of a centrifugal pump and write down its importance.
8) Define Venturimeter. Briefly describe its parts and give formula to be used with venturimeter.
9) Write down the advantages and disadvantages of Manometers.
10) Write down the relationship between different types of pressures.

                                     SECTION-C

Q3. Attempt any three questions.                                                       3×10=30

     i) Calculate the specific weight, mass density, specific volume, relative density of 1.5 litres of a liquid which weighs 5.5 N.
    ii) A rectangular plate 4m long and 2m wide is immersed vertically in water in such a way that its 4m side is parallel to water surface. Find total Pressure and centre of pressure on plate when: (1) Its top surface is coinciding with free surface and (2) Its top surface is 1.5m below the free surface.
   iii) The right limb of simple U-Tube manometer containing mercury is open to atmosphere while the left limb is connected to a pipe in which a fluid of specific gravity 0.85 is flowing. The centre of pipe is 15 cm below the level of mercury in the right limb. Find the pressure of fluid in pipe if difference of mercury level in two limbs is 25 cm.
   iv) The rate of flow through pipe A-B is 500 litres per second. The diameter at end A is 20 cm and velocity at end B is 3 m/s. Determine the velocity at end A and Diameter of pipe at end B.
   v) What is a reciprocating pump? Write down in detail about the main parts and working of single acting reciprocating pump along with neat sketch.
   vi) Define head loss through pipe, explain its different types along with neat sketches for different pipe L-sections of pipes.

Fluid Mechanics 3rd Sem/Civil/Dec 2016 Diploma Solved Question Paper

                                      SECTION-A

     a) Fill in the blanks                                               1×10=10

     1) When the fluid is at rest shear stress is _____________
     2) Density of water is __________ at 4ºC.
     3) According to  _________ the pressure at a point in a fluid at rest is same in all directions.
     4) Intensity of pressure at the bottom of a tank filled with fluid having specific weight ‘w’ upto a height of ‘h’ will be ___________.
     5) Atmosphere pressure at sea level is ____ mm of mercury.
     6) Piezometer measures ____________ pressure only.
     7) Laminar flow is also called ________ flow.
     8) The pipe running partially full behaves like __________ .
     9) Pumps convert    mechanical energy into _______________ .
    10) Water in canals runs under pressure.

   (b) True/ False statements 1×5=5

    11) Gases possess definite volume.
    12) Unit of Kinematic viscosity is Stoke.
    13) U-Tube can be used to measure vaccum pressure.
    14) Hydraulic jump occurs on upstream side of dam.
    15) Centre of pressure acts as centre of gravity for immersed surface.

Fluid Mechanics 3rd Sem/Civil/dec 2016 Diploma Solved Question Paper


Get Started

https://www.youtube.com/watch?v=y_wJffQkeWo&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=6&t=0shttps://www.youtube.com/watch?v=mV41CMWonN4&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=7&t=0shttps://www.youtube.com/watch?v=M_RR6LVICp0&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=20&t=0shttps://www.youtube.com/watch?v=3BNQLUnbNpYhttps://www.youtube.com/watch?v=ZDkyNOzoG8A&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=8&t=0shttps://www.youtube.com/watch?v=s0LVPE0Q3LE&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=14&t=0s

Section a Fluid Mechanics 3rd Sem/Civil/dec 2016 Diploma Solved Question Paper

When the fluid is at rest shear stress is _____________
Density of water is __________ at 4ºC.
According to  _________ the pressure at a point in a fluid at rest is same in all directions.
Intensity of pressure at the bottom of a tank filled with fluid having specific weight ‘w’ upto a height of ‘h’ will be ___________.
Atmosphere pressure at sea level is ____ mm of mercury.
Piezometer measures ____________ pressure only.
Laminar flow is also called ________ flow.
The pipe running partially full behaves like __________ .
Pumps convert    mechanical energy into _______________ .
Gases possess definite volume.T/F
Unit of Kinematic viscosity is Stoke.T/F
U-Tube can be used to measure vaccum pressure.T/F
Hydraulic jump occurs on upstream side of dam.
Centre of pressure acts as centre of gravity for immersed surface.

Centre of pressure acts as centre of gravity for immersed surface.

Fluid Mechanics 3rd Sem/Civil/Dec 2016 Diploma Solved Question Paper Click Here

Section B :Fluid Mechanics 3rd Sem/Civil/DEC 2016 Diploma Solved Question Paper

Define “Fluid” and briefly describe its types along with examples.

“Fluid” and briefly describe its types along with examples.

Explain the fluid property ‘Capillarity’.

Fluid property ‘Capillarity’.

Differentiate between gauge pressure and vaccum pressure.

What is the Differentiate between gauge pressure and vaccum pressure.

Define Bernaulli’s theorem and write down its assumptions.

Bernaulli’s theorem and write down its assumptions.

Write down the difference between Orifice and Notch.

Difference between Orifice and Notch.

What do you understand by most economical channel section? Write down conditions for rectangular channel section to be most economical.

Most economical channel section

Conditions for rectangular channel section to be most economical.

Define priming of a centrifugal pump and write down its importance.

Priming of a centrifugal pump its importance.

Define Venturimeter. Briefly describe its parts and give formula to be used with venturimeter.

Venturimeter

Describe its parts and give formula to be used with venturimeter.

Write down the advantages and disadvantages of Manometers.

Advantages and disadvantages of Manometers.

Write down the relationship between different types of pressures.

Relationship between different types of pressures.

Fluid Mechanics 3rd Sem/Civil/Dec 2016 Diploma Solved Paper Click Here

Fluid Mechanics 3rd Sem/Civil
/dec 2016 Diploma Solved Question Paper


Get Started

https://www.youtube.com/watch?v=UHX6f8TIvX8https://www.youtube.com/watch?v=M_RR6LVICp0https://www.youtube.com/watch?v=mV41CMWonN4https://www.youtube.com/watch?v=s0LVPE0Q3LE&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=14&t=0s

Section c :-Fluid Mechanics 3rd Sem/Civil/dec 2016 Diploma Solved Question Paper

Calculate the specific weight, mass density, specific volume, relative density of 1.5 litres of a liquid which weighs 5.5 N.

Find Specific weight, mass density, specific volume, relative density Numerical
    

A rectangular plate Numerical

Rectangular plate Numerical
   

simple U-Tube manometer Numerical

The right limb of simple U-Tube manometer Numerical
  

Pipes Related Problem Numerical

Pipes Related Problem
   

What is a reciprocating pump? Main parts and working of single acting reciprocating pump

Reciprocating pump

Main parts and working of single acting reciprocating pump 
   

Define head loss through pipe, explain its different types along with neat sketches for different pipe L-sections of pipes.

Head loss through pipe

Explain its different types along with neat sketches

Fluid Mechanics 3rd Sem/Civil/Dec 2016 Diploma Solved Question Paper Contact Us
MY YOUTUBE CHANNEL

JK Smart Classes Upload Lecture for Degree classes like B.TECH,M.TECH in any stream like ECE,EE,ME and Civil Engineering
\"JK
JK SMART CLASSES
ER.JASWINDER KUMAR
\"JK
JK SMART LECTURE
ER.JASWINDER KUMAR
Engineering Classes Upload Lecture for Polytechnic Diploma classes in any stream like ECE,EE,ME and Civil Engineering
\"JK
ENGINEERING CLASSES
ER.JASWINDER KUMAR
\"JK
er.jaswinder kumar
Senior Lecturer

Scroll to Top