Basic Electronics 2nd Sem Exam ECE/ECE/CSE/0664/2661 May 2016
     Basic Electronics 2nd Sem EEE/ECE/CSE/0664/2661 May 2016                                                                                                SECTION-A
Q1. Do as directed.                                       15×1=15
- At absolute zero temperature, the conduction band of a semiconductor is totally Empty.
- To obtain p-type Semiconductor, Trivalent impurity is added to a pure Semiconductor.
- The value of knee voltage for germanium diode is 0.3 V
- Maximum value of rectification efficiency of full wave rectifier can be 81.2%.
- Usually, a Zener diode is used as a Voltage Regulator.
- Material used for the construction of LED is GaAsP  .
- In a transistor, there are Two PN Junction.
- A transistor is usually applied for AmplifierÂ
- The method by which the operating point is made independent of temperature variations or variations of transistor parameters (þ) is called Stabilization of Operating Point.
- For a good voltage amplifier, its input impedance should be High.
- A FET is also called as Unipolar Device .
- Filter circuits are used to reduce ac Component.
- PIV stands for Peak Inverse Voltage.
- A capacitor circuit does not allow to pass dc components.
- Define Drift.
                      SECTION-B
Q2. Attempt any five questions.                                      5×6=30
- Explain with suitable diagram Intrinsic and Extrinsic Semiconductor.
- Draw the block diagram of a power supply. Explain in brief the functioning of each
- Explain how a Zener diode maintains constant voltage across the load.
- Explain the working of npn transistor.
- Describe the potential divider circuit in Details.
- In what way the temperature variations affect the operating point of a transistor?
- Explain the working principle of a FET?
- Explain working of shunt capacitor filter
                      SECTION-C
Q3. Attempt any three questions.                                     3×10=30
- Â With the help of circuit diagram explain the working of Full Wave Bridge Type Rectifier.
- Explain the input and output characteristics of CE Configuration? Also derive the relation between α and β.
- Explain Conductors, Insulators and Semiconductors on the basis their energy band diagrams.
-  Write a short note on (a) V-I characteristics of a diode  (b) Atomic structure of Germanium atom
BASIC ELectronics be may 2018 DIPLOMA PAPER SOLUTION
Section a FILL IN THE BLANKS be paper
At absolute zero temperature, the conduction band of a semiconductor is totally ____
Empty
To obtain p-type Semiconductor, ________ impurity is added to a Pure Semiconductor.
Trivalent
The value of knee voltage for germanium diode is ____
0.3 V
The maximum value of rectification efficiency of full wave rectifier can be ______.
81.2%
Usually, a Zener diode is used as a ______.
Voltage Regulator
The material used for the construction of LED is _____.
GaAsPÂ
In a transistor, there are Two PN Junction
Two
Stabilization of Operating Point
For a good voltage amplifier, its input impedance should be _____.
High
A FET is also called as ______Device
Uni-polar
Filter circuits are used to reduce ________
ac Component
Peak Inverse Voltage
A capacitor circuit does not allow to pass _______
dc components
JK Engineering Classes Provide the Video lecture solution of these paper Click Here
Section B : BE PAPER MAY 2018 PAPER
Explain Intrinsic and Extrinsic Semiconductor with Suitable Diagram ?
Intrinsic and Extrinsic Semiconductor Click Here.
Block diagram of a power supply.
How a Zener diode maintains constant voltage across the load.
Explain the working of NPN Transistor ?
Working of NPN Transistor Click Here
Describe the potential divider circuit in Details.
Potential divider circuit Click Here
In what way the temperature variations affect the operating point of a transistor?
hybrid Parameter) of transistor
In what way the temperature variations affect the operating point of a transistor?
Temperature variations affect the operating point of a transistorÂ
Explain the Phase reversal of output voltage with respect to input voltage in an Amplifier ?
Phase reversal of output voltage with respect to input voltage in an AmplifierÂ
JK Engineering Classes Provide the Video lecture solution of these paper Click Here
BASIC ELECTRONICS DIPLOMA MAY 2018 PAPER
Get Started
https://www.youtube.com/watch?v=3BNQLUnbNpYhttps://www.youtube.com/watch?v=M_RR6LVICp0https://www.youtube.com/watch?v=mV41CMWonN4https://www.youtube.com/watch?v=s0LVPE0Q3LE&list=PLA9Q9SDZ781WXNAWit379A4CRLMvjGiUw&index=14&t=0s
Section c solved bee paper
Explain conductors, insulators and semiconductors on the Basis of their Energy Band Theory ?
Explain Construction Working of Full Wave Bridge Rectifier ?
Full Wave Bridge Rectifier Click Here
Explain PN Junction and draw the V-I characteristics of PN Junction ?
Input and Output Characteristics of CE configuration of a Transistor ?
CE configuration of a Transistor Click Here
Write Short Note on Light Emitting Diode ?
Light Emitting Diode
Define Drift and Diffusion current
Drift and Diffusion current
BASIC ELECTRONICS 2nd SEMESTER EXAM/ECE/CSE/IT/EEE/0664/May 2018 Contact Us
MY YOUTUBE CHANNEL
JK Smart Classes Upload Lecture for Degree classes like B.TECH,M.TECH in any stream like ECE,EE,ME and Civil Engineering
JK SMART CLASSES
ER.JASWINDER KUMAR
JK SMART LECTURE
ER.JASWINDER KUMAR
Engineering Classes Upload Lecture for Polytechnic Diploma classes in any stream like ECE,EE,ME and Civil
ENGINEERING CLASSES
ER.JASWINDER KUMAR
er.jaswinder kumar
Senior Lecturer